Non-Corrosive Fittings

Non-corrosive Light Fittings

Non corrosive light fittings are LED lighting solutions that are popular for being anti-corrosive, vapour proof, weather/waterproof, IP chart rated, and tri-proof. Non corrosive fitting options available at Meteor are all shock-resistant and dustproof which makes them ideal for installation in industrial and public spaces such as warehouses, factories, workshops, and car parks. 

A major reason why LED non corrosive light fitting options are replacing fluorescent non-corrosive lights is because of their energy-efficient mechanism that can allow the user to save up over 50% in costs; it is a greener alternative and helps reduce carbon emissions to boot. 

A longer lifespan is also another advantage that comes with non corrosive light fittings – this is because of the improved heat dissipation that is enabled by having a separate LED driver coupled with the LEDs sitting on a large metal board/gear tray. It is also possible to have an emergency module within the non corrosive fitting which is something not possible with another retrofit non corrosive fittings. 

What is non corrosive light fitting?

Non corrosive light fitting devices are modern lighting solutions that are similar to fluorescent tubes. The term non corrosive is industry-specific and non corrosive light fittings are especially tough, dust-proof, and weatherproof that can be used to light up various commercial space applications such as parking lots, warehouses, cold stores, loading bays, shopping malls, offices, etc. 

One of the most prominent reasons why non corrosive light fittings are commonly used in place of older alternatives is the stylish look that they provide along with their energy-saving capabilities – they bring about a significant improvement over other conventional lighting fixtures. 

There are many other reasons why non corrosive fitting light options are worth buying. Some of them include how Meteor’s range of non corrosive light fittings do not heat up and emit ultraviolet emissions the way old fluorescent tube lights do. 

In addition, LED non corrosive light fittings do not produce harmful radiation, waves, or buzzing sounds of any kind. There being no irritating noises such as these coming from non corrosive light fitting instalments allows for an enhanced user experience as well as a positive ambience. 

Non corrosive fitting options also are lightweight, with little to no maintenance cost, and have a much higher output and up to 90% longer lifespan compared to their fluorescent tube counterpart. 

Why Use Non Corrosive Light Fittings in Commercial Areas? 

LED non corrosive fitting options are often used in commercial set-ups and residential buildings because of the many benefits they offer in such spaces. 

Non corrosive light fittings are useful in bringing an element of safety to the lighting systems that are installed in areas such as vast parking spaces. What an LED non corrosive fitting does is provide excellent illumination which aids surveillance cameras in functioning at high efficiency. 

Non corrosive light fittings also have the benefit of using LED bulbs, which are widely known to increase human productivity and this makes them the best choice for offices, warehouses, and other spaces where users are constantly working for long hours. 

Besides the creation of a productive ambience, non corrosive light fittings can bring down any corporate establishment’s maintenance costs by a significant amount. For spaces such as a garage, if you are looking for a lighting solution that is flicker-free and well-lit, then a 5ft LED non corrosive fitting may be the best choice you can make. 

What Factors to Consider Before Buying a Non Corrosive Fitting?

When looking at non corrosive light fittings, there are several factors to consider depending on what kind of space you are planning to install them in. You can only get the most out of all the advantages that a non corrosive light fitting device brings on the condition that they are procured and installed with proper consideration. 

IP Rating

At Meteor, you can find non corrosive light fittings with various IP ratings available, and this will be the indicator that will tell you whether the non corrosive fitting is good for use in wet or outdoor areas. For more information, refer to Meteor’s IP Rating Chart. 

Integrated LED

When looking at different non corrosive fitting options, make sure to buy one that has integrated LED lighting because it will be a much more streamlined and practical device to use in the long run. 

Size 

Various sizes and types of non corrosive light fittings are available at Meteor that can fit all kinds of applications. This is why it is necessary to give particular attention to ensuring buying standards and easily available types when it comes to non corrosive fitting devices. You will be able to find LED non corrosive light fittings available in 2 feet and 4 feet sizes. 

Colour Temperature

Depending on the area of application, the colour temperature will differ. A colour temperature of a non corrosive fitting being between 3000K and 4000K will project a soft and warm ambience. In other cases, in locations like garages or workshops, a better non corrosive fitting option would be one with a colour temperature of 5000K so it is more vivid and bright. Check out our colour temperature blog on how to choose the correct colour temperature.